© Educational Video Network, Inc. 2005 - www.evndirect.com
Your leading source for curriculum-based educational videos and DVDs.
Order this item online today!
|
Study Guide Questions
|
|
1.
Why do you have to remove the battery when you are working on a transaxle?
|
|
|
2.
The ____________ ________________ cable is activated by the clutch foot pedal.
|
|
|
3.
What must you do to the car before jacking it up?
|
|
|
4.
What does the shifter tube do?
|
|
|
5.
What does the transaxle brace connect?
|
|
|
6.
Remove asbestos fibers from the transaxle using __________________ cleaner.
|
|
|
7.
The _________________ ____________ is coupled between the pressure plate and the fly wheel.
|
|
|
8.
Why must you remove the bolts from the clutch in a star pattern?
|
|
|
9.
How do you know when the clutch disk needs replacing?
|
|
|
10.
Use a pry bar to hold the __________ _____________ in place while removing the bolts.
|
|
|
11.
Replace the ______________ bearing when you replace the clutch.
|
|
|
12.
Why should the surface where the engine block and the transaxle meet be clean?
|
|
|
13.
Tighten the bolts on the fly wheel in a _______________________ pattern.
|
|
|
14.
_______________ the bolts so that they are held evenly and so the stress will be the same.
|
|
|
15.
The ________________ tool gets the disk exactly lined up with the end of the crankshaft and the fly wheel.
|
|
|
16.
Keep the jack under the ________________, supporting it until you get some of the bolts in place.
|
|
|
17.
How taut should the clutch release cable be?
|
|
© Educational Video Network, Inc. 2005 - www.evndirect.com
Your leading source for curriculum-based educational videos and DVDs.
|